- Improved Noise Immunity
- Integrated Design
- Powerful Wireless Features
- Usability Enhancements
- Advanced RF Analytics
Ubiquiti Networks launches the latest generation of airMAX® CPE (Customer Premises Equipment), the NanoBeam® ac.
Improved Noise Immunity
The NanoBeam ac directs RF energy in a tighter beamwidth. With the focus in one direction, the NanoBeam ac blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency.
The radio and antenna are combined to create a more efficient and compact CPE. The NanoBeam ac gets maximum gain out of the smallest footprint. Providing high performance and an innovative form factor, the NanoBeam ac is versatile and cost‑effective to deploy.
Sporting an all-new design for improved usability, airOS® v7 is the revolutionary operating system for Ubiquiti® airMAX ac products.
Powerful Wireless Features
• airMAX ac Protocol Support
• Long-Range Point-to-Point (PtP) Link Mode
• Selectable Channel Width
• PtP: 10/20/30/40/50/60/80 MHz
• PtMP: 10/20/30/40 MHz
• Automatic Channel Selection
• Transmit Power Control: Automatic/Manual
• Automatic Distance Selection (ACK Timing)
• Strongest WPA2 Security
• Dynamic Configuration Changes
• Instant Input Validation
• HTML5 Technology
• Optimization for Mobile Devices
• Detailed Device Statistics
• Diagnostic Tools, including Ethernet Cabling Test, RF Diagnostics, and airView® Spectrum Analyzer
Advanced RF Analytics
airMAX ac devices feature a multi-radio architecture to power a revolutionary RF analytics engine.
An independent processor on the PCBA powers a second, dedicated radio, which persistently analyzes the full 5 GHz spectrum and every received symbol to provide you with
the most advanced RF analytics in the industry.
Data from the spectrum analysis and RF performance monitoring is displayed on the Main tab and airView Spectrum Analyzer.
The Main tab displays the following RF information:
• Persistent RF Error Vector Magnitude (EVM) constellation diagrams
• Carrier to Interference-plus-Noise Ratio (CINR) histograms
• Signal-to-Noise Ratio (SNR) time series plots
airView allows you to identify noise signatures and plan your networks to minimize noise interference. airView performs the following functions:
• Constantly monitors environmental noise
• Collects energy data points in real-time spectral views
• Helps optimize channel selection, network design, and wireless performance
airView runs in the background without disabling the wireless link, so there is no disruption to the network.
In airView, there are three spectral views, each of which represents different data.
• Waterfall Aggregate energy collected for each frequency
• Waveform Aggregate energy collected
• Ambient Noise Level Background noise energy shown as a function of frequency
Available with a firmware upgrade to airOS v7.1, airView provides powerful spectrum analyzer functionality, eliminating the need to rent or purchase additional equipment for conducting site surveys.
Unlike standard Wi‑Fi protocol, Ubiquiti’s Time Division Multiple Access (TDMA) airMAX protocol allows each client to send and receive data using pre-designated time
slots scheduled by an intelligent AP controller.
This time slot method eliminates hidden node collisions and maximizes airtime efficiency, so airMAX technology provides performance improvements in latency, noise immunity, scalability, and throughput compared to other outdoor systems in its class.
Intelligent QoS Priority assigned to voice/video for seamless streaming.
Scalability High capacity and scalability.
Long Distance Capable of high‑speed, carrier‑class links.
The next‑generation airMAX ac technology boosts the advantages of our proprietary TDMA protocol.
Ubiquiti’s airMAX engine with custom IC dramatically improves TDMA latency and network scalability. The custom silicon provides hardware acceleration capabilities to the airMAX scheduler, to support the high data rates and dense modulation used in airMAX ac technology.
airMAX ac supports high data rates, which require dense modulation: 256QAM – a significant increase from 64QAM, which is used in airMAX.
With their use of proprietary airMAX ac technology, airMAX ac products supports up to 450+ Mbps real TCP/IP throughput – up to triple the throughput of standard airMAX products.
|Dimensions||140 × 140 × 54 mm (5.51 × 5.51 × 2.13″)|
|Weight||0.320 kg (0.71 lb)|
|Power Supply||24V, 0.5A Gigabit PoE|
|Max. Power Consumption||6W|
|Operating Frequency||Worldwide||USA: U-NII-1||USA: U-NII-2A||USA: U-NII-2C||USA: U-NII-3|
|5150 ~ 5875 MHz||5150 ~ 5250 MHz*||5250 ~ 5350 MHz*||5470 ~ 5725 MHz*||5725 ~ 5850 MHz*|
|Networking Interface||(1) 10/100/1000 Ethernet Port|
|Processor Specs||Atheros MIPS 74Kc, 533 MHz|
|Memory||64 MB DDR2, 8 MB Flash|
|LEDs||(1) Power, (1) LAN, (4) WLAN|
|Signal Strength LEDs||Software-Adjustable to Correspond to Custom RSSI Levels|
|Channel Sizes||PtP Mode||PtMP Mode|
|10/20/30/40/50/60/80 MHz||10/20/30/40 MHz|
|Enclosure||Outdoor UV Stabilized Plastic|
|Mounting||Pole‑Mount (Kit Included), Wall‑Mount|
|Wind Loading||21.4 N @ 200 km/h (4.8 lbf @ 125 mph)|
|Wind Survivability||200 km/h (125 mph)|
|ESD/EMP Protection||Air: ± 24 kV, Contact: ± 24 kV|
|Operating Temperature||−40 to 70° C (−40 to 158° F)|
|Operating Humidity||5 to 95% Noncondensing|
|Wireless Approvals||FCC, IC, CE|
|Salt Fog Test||IEC 68‑2‑11 (ASTM B117), Equivalent: MIL‑STD‑810 G Method 509.5|
|Vibration Test||IEC 68 ~ 2-6|
|Temperature Shock Test||IEC 68 ~ 2-14|
|UV Test||IEC 68 ~ 2-5 at 40° C (104° F), Equivalent: ETS 300 019 ~ 1-4|
|Wind-Driven Rain Test||ETS 300 019-1-4, Equivalent: MIL-STD-810 G Method 506.5|